Category: Blog

On the Straight and Narrow! 1940 Ford Chopped Coupe Survivor Hot Rod Wheel Alignment

On the Straight and Narrow! 1940 Ford Chopped Coupe Survivor Hot Rod Wheel Alignment

Advertisements

We get this Beautiful 1940 Ford Running Straight and True Down the Road Again With out Vintage Dunlop Wheel Alignment Tools If you enjoy what we are doing like and subscribe, We have started a Patreon account if you want to lend a hand in improving the channel. https://www.patreon.com/strongsgarage

Landon Rush’s ’29 Ford Flathead Pickup – Garage Hotrods

Advertisements

Landon Rush likes to keep busy. He’s a husband, a father, an Iraq and Afghanistan war veteran who is still serving in the National Guard, and he owns five, no wait… I think it’s six, hot rods. I’m really excited to have one of those hot rods in GHR, his very cool and very classic Flathead powered 1929 Ford Roadster Pickup.

“I’ve only had the pickup about a year,” Landon told me. “It was a quick build. I had a hot rod years ago, then I got into customs and trucks, and I wanted to get another hot rod. I saw this on Criag’s List. I sold my ‘58 Chevy truck to pick it up. I blew it all apart and quickly redid everything.”

And Landon wasn’t kidding about redoing everything. Body, frame, engine, transmission, rear end, suspension, interior – the whole works. It was amazing to me that he did it all in one year.

“The one thing I have going for me is that I work quick,” he said. “I try to do quality work in the least amount of time without taking any shortcuts. I get ’em done so I can enjoy them.”

Of course the Flathead engine between the frame rails caught my eye. It’s a 1950 OB8 model, displacing 239 cubic inches. It has all new ISKY internals and Edelbrock aluminum heads and intake manifold. That manifold has two Stromberg 97 two-barrel carbs, complete with vintage scoops from Lucky Burton of Lucky’s Speed Equipment Parts (@luckyburton on Instagram), mounted on it.

And just in case you haven’t been paying attention, that’s a ‘29 Ford with a Flathead engine, dual Strombergs, and ISKY and Edelbrock components. Can you get a more classic hot rod than that?

The Flathead’s exhaust is also vintage. The chromed exhaust headers mount up to a megaphone exhaust pipe that Landon constructed from cutting a 1935 Ford driveshaft in half. “That’s what they were doing back back in the 50s,” Landon told me. “They’d take the driveshaft and chop it in half and use that to make the lake pipes.” He welded a 90 degree bend with a flange on to the header and the megaphone exhaust pipe bolts to the flange.

I asked Landon if he had any mufflers in that exhaust. “No,” he said. “It’s straight pipe. And it’s got a little bit of a lope because of the ISKY cam. I like to get on it. It’s loud as sh…”

Well let’s just say Landon said it can be really loud.

Read on

This Makes Us Mad! — Mustang Maniac (Heart Breaking Reblog)

Advertisements

Really really horrible thing to have happen, and then not having the moral fibre to hold up their hands 🙁

Hopefully someone may have seen this happen?

There is nothing more heartbreaking than seeing your pride and joy getting wrecked by some plank who don’t care. Contrary to what people may think, we don’t think pound notes when we see things like this, we feel the pain of the customer as we understand. This week we have dropped what we were doing […]

This Makes Us Mad! — Mustang Maniac

“Little Eve” | A 1932 Ford Hot Rod Build – @FourSpeedFilms

Advertisements

Another great film from Ben Kahan

I had a lot of fun shooting and editing this one! I wanted to creatively challenge myself by making a short documentary on Simon’s 1932 Ford FIve Window coupe. Let me know if you enjoyed the video!

Follow me on Instagram: https://www.instagram.com/benkahan/

Follow Simon on Instagram: https://www.instagram.com/luckyglucky/

Special thanks to Aaron Kahan for helping out with the rollers!

Hemi Powered 1932 Fords!!! – Garage Full Of New York Drag Racing History – @IronTrapGarage

Advertisements

One of our viewers Ed emailed us many months ago about the 1932 Fords that were owned by his father, both with New York drag racing history. Ray Stillwall purchased the 1932 Ford Roadster in 1948 and built the car in stages over the next 10 years. The roadster was raced at many local tracks, and even at the Allentown Fairgrounds back in 1955! Ed’s father was able to purchase the car back in 1970 and after a few other owners it ended back in the hands of Ed. The blue 1932 Ford Tudor was owned by Ed’s father and was also raced all over. This one stayed in the family and Ed continues to drive and race the car today. We enjoyed spending time with Ed and hearing all of the stories of the two 1932 Ford’s in his shop. Thanks for watching

Massive 1934 Ford Collection Buyout – 5 Cars and Tons Of Parts!!! – @IrontrapGarage

Advertisements

It is not everyday that you receive an email asking if you would be interested in buying a barn full of 1934 Fords, but if you do respond immediately. At first we thought the barn was going to be full of rusty and rotten 34s, the pictures we received told a different story. At that point we knew we had to try to buy it all. We won’t spoil to much in the description so be sure to watch the entire video!!

Heartbeat of American motorsports displayed in the country’s heartland – Larry Edsall @ClassicCars.com

Advertisements
Among the many galleries in Speedway Motors Museum of American Speed is one that focuses on all the companies that produced parts to enhance the performance of Henry Ford’s Model T engine. Frontenac was the Chevrolet brothers company after they sold the rights to their family name to Chevrolet | Larry Edsall photos

In the early 1940s, a policeman showed up at the Smith family home in Lincoln, Nebraska, with 12-year-old D. William Smith in tow. Like other youngsters, he had used an old gas-powered Maytag washing machine engine to power a go-kart. Problem was, he’d been driving it down one of the town’s main streets.

From an early age, D. William Smith, to become better known as “Speedy” Bill, had a need for speed. He tinkered with cars, raced them and motorcycles as well, yet went to Nebraska Wesleyan University and graduated with a degree in education. 

But instead of teaching, he borrowed $300 from his fiancé, Joyce — who later would insist that he never officially repaid that loan — and opened a speed shop called Speedway Motors in a 20×20-foot building on Lincoln’s main street, US Route 6/O Street. 

The museum is about preserving American racing history, When the Smiths acquired the garage in which A.J. Watson built his Indy cars, they wanted its display to be so accurate that they used an overhead camera to record all the oil stains on the floor of Watson’s garage so they could be copied in the museum’s display

Fast forward a few decades and the Smiths with their four sons grew Speedway Motors into a major supplier of automotive speed equipment that occupies a half-million square-foot warehouse and headquarters on a 46-acre Lincoln campus just off O Street that since 1992 has included the Speedway Motors Museum of American Speed.

The museum is a separate building just across the parking lot that fills three stores while preserving race cars, engines and historic performance accessories. For example, there’s a large area devoted to Henry Ford’s Model T, and to the parts from Frontenac, Rajo, Riley, Roof and others that, shall we say, accelerated the car’s capabilities. 

Ditto the Flathead Ford V8, with one wall covered by every cylinder head ever created to enhance that engine’s performance, including some experimental models that Ford sold to the museum by mistake and then asked for their return, which Speedway Motors politely declined.

Read on

ONE OLD PROOF SHEET – Pat Ganahl’s Rod and Custom

Advertisements

I think it’s time for something old. Really old. Like 1930s and pre-War ’40s old. We’re talking Muroc dry lake and the birth of hot rodding–though not by that name, yet. The Southern California Timing Association (SCTA), the first “umbrella” organization gathering dozens of already existing roadster clubs, was formed in early 1938.

Also, for me, it’s time for something a little simpler. It just is. So what I decided to do was another “one proof sheet” column. That is, all the photos you see here today came from one roll of 35mm film, in this case 35 exposures, contact-printed (actual film size) on one 8 x 10 sheet of photo paper. These are analogous to thumbnails on your computer. They’re about an inch wide, and you really need a loupe magnifier to see them clearly.

So I went to my files, opened a drawer marked B&W Negs, and then selected a file marked “Early Lakes.” There were about 100 proof sheets in it. But I know what most of them are, and what I was looking for–an old one with notes written on the back. I’m really not into doing research this week.

I found it quickly, and the first note on the back said, “All photos ’39-’40.”

But a quick scan through them showed me that wasn’t quite correct, since the photo above was listed as “Strokers club from Whittier/La Habra at Irvine Park ’47(?). All cars raced lakes, too.” That’s probably correct. You’ll note all are A and ’32 Ford roadsters. There were more in other shots. And I’m pretty sure this was Frank Currie’s club, and also pretty sure that’s who had all these photos and let me copy them with my camera. Besides building 9-inch Ford rearends, Frank was a consummate hot rodder all his life.

I should also explain that (a) I shot this roll of film, developed it, printed the proof sheet, and wrote the notes on the back 45 years ago. Wish I had a loupe that would sharpen my memory. And (b) not only are some of the notes hard to read, but some photos don’t have any. But given those caveats, let’s just dive in. This will be primarily a picture show, and I’ll relate what I know (or don’t) as we go.

Read on